Positions: Products→Flow control valves→Throttle and throttle check valves

Symbols:

Throttle and throttle check valves

Model FT-MG/MK series are throttle and throttle check valves used to restrict flow. The MG series is able to control the flow in either directions, the MK series is control the flow in one direction while permitting free flow in the opposite.

Characteristic:

• 1. For in-line mounting and interchangeable with other brand
• 2. One direction with leak-free closure.
• 3. Throttle and throttle check valve, optional

Technical data

General information
Size	6	8	10	15	20	25	30
Inch thread	G1/4	G3/8	G1/2	G3/4	G1	G1 1/4	G1 1/2
Metric thread	M14X1.5	M18X1.5	M22X1.5	M27X1.5	M33X1.5	M42X1.5	M48X2
Flow rate (L/min.)	15	30	50	125	200	300	400
Operating pressure (bar)	315
Cracking pressure of check valve (bar)	0.5
Fluid viscosity (mm2/s)	10-800
Fluid Contamination	Recommend: A filter with a minimum filtrating rate of ß10 >=75

Model FT -- MG / MK dimensions for mounting

Size	D2 Metric (Inch)	T (mm)	L (mm)	D (mm)	D2 (mm)
6	M14X1.5 (G1/4)	12	65	32	34
8	M18X1.5 (G3/8)	12	65	36	38
10	M22X1.5 (G1/2)	14	80	46	48
15	M27X2 (G3/4)	16	100	55	58
20	M33X2 (G1)	18	110	70	72
25	M42X2 (G1 1/4)	20	130	85	87
30	M48X2 (G1 1/2)	22	150	90	93

Down load: Throttle and throttle check valves, Throttle and throttle check valves Manufacturer, Supplier, Factory, Exporter in china

1 

Throttle and throttle check valves Related Keywords: Throttle valves ,
Other related category: Throttle check valves,Double throttle check valves,Restrict flow valves,

Add: Industrial park, zhuangshi street, Zhenhai, Ningbo, Zhejiang, 315201, China
Contact person: Sean Zhou
Tel:  0086-574-86303380
Fax:  0086-574-86303386
sales@hydraulicvalvesf.com
sezhou@yahoo.com